m88vinLiên kết đăng nhập

EPR Legislation and Packaging: Laws in the US vs. EU

A producer’s job doesn’t end after a purchase. Extended Producer Responsibility (EPR) legislation mandates that producers manage the end-of-life disposal of their products and packaging. In essence, producers must consider the environmental impact of their products once consumers have disposed of them. It’s critical for addressing the growing global packaging waste problem. Between 2000 and 2019, packaging contributed to roughly . Surprisingly, non-biodegradable packaging during the COVID-19 pandemic. These alarming statistics highlight the necessity for effective waste management strategies. By 2050, is also predicted to reach around 70%, making it crucial for businesses and communities to prioritize sustainability and implement responsible waste management practices to mitigate environmental impact.EPR legislation incentivizes producers to use more sustainable materials and develop methods to dispose of and collect their packaging waste easily. However, specific EPR regulations differ among regions. This article discusses the differences between EPR legislation in the United States and the European Union. It delves into how each region approaches the different types of packaging, the responsibilities of producers, and the recycling requirements producers must meet.

Jump To Section


Extended Producer Responsibility (EPR) Legislation: An Overview 

Extended producer responsibility (EPR) is a principle that holds producers accountable throughout a product’s life cycle, aligning with the . Under EPR, producers are incentivized to use biodegradable and sustainable packaging materials and support the recycling process financially.

Understanding extended product responsibility legislation allows businesses to operate sustainably while complying with local laws. 

The History of EPR Legislation

Despite the recent global sustainable packaging regulation trends, EPR is not new. Dr. Thomas Lindhqvist of Lund University introduced the concept by the end of the 20th century. 

According to research by Dr. Kleoniki Pouikli, it was meant to improve resource efficiency in response to the growing waste problem caused by increased product efficiency. It aims to shift the burden of collecting end-of-life products from authorities to producers. The concept became so popular that almost all member countries of the Organization for Economic Co-operation and Development (OECD) adopted EPR policies eventually; was the pioneer in 1990. As product categories such as electronics became more prevalent, laws evolved to include them under EPR regulations.Now, authorities worldwide have implemented EPR regulations in differing capacities to continue the fight against climate change.

The Benefits of EPR Legislation 

EPR pushes companies to find new ways to reduce their packaging waste. Besides the environmental benefits of more companies becoming sustainable packaging manufacturers, it also has business advantages.

For instance, following EPR regulations allows companies to meet consumer expectations. Recent sustainable packaging statistics show that 73% of consumers are willing to change their purchasing habits to minimize their environmental impact. 

Compliance with EPR regulations can also lead to financial benefits for business owners. Using recycled materials lowers the true cost of packaging, allowing organizations to reduce expenses. This cost-saving can provide additional funds to invest in custom packaging solutions that capture consumer attention.

Back to Top

EPR Legislation in the United States 

The impact of extended responsibility legislation has spread to the United States in different forms since only a handful of states have adopted it. As of 2023, only 11 states have implemented EPR packaging legislation.Some of these EPR regulations that currently exist include the following:
  1. : Plastic Pollution Prevention and Packaging Producer Responsibility Act
  2. : Producer Responsibility Program for Recycling
  3. : Washington Recycling and Packaging Act

The EPR legislation in the US includes provisions for different recyclable packaging materials and types that businesses follow.

Types of Packaging in the US Under EPR Legislation

EPR packaging and legislation in the US is still growing, which is why it currently covers a few types of packaging, including the following: 
  1. Plastics 
  2. Paper and cardboard
  3. Glass
  4. Metals
EPR legislation expects and requires US companies to take responsibility for the deterioration of these products after disposal, among other obligations. 

Responsibility of Producers in the US

Many EPR policies define producers as entities that manufacture, import, or sell products using materials covered by regional EPR regulations, such as paper. Businesses must then use EPR-related materials and contribute fees to their local EPR program to meet certain standards and responsibilities. However, it depends on the state.For instance, in , producers must fund stewardship organizations responsible for managing their end-of-life products, including collection and recycling. says that those violating the program can be fined up to $100 per day.Oregon’s outlines a similar requirement. The legislation specifically highlights producers of packaging items, paper products, and food service ware during their end-of-life stage. Violations can incur penalties of up to .According to the , new bills require businesses to cover the cost of infrastructure improvements and sustainability education. Hence, companies must remain updated with their state’s laws to stay compliant and avoid legal concerns. EPR regulations also include collection and recycling requirements standards to ensure producers fulfill their responsibilities appropriately. 

Collection and Recycling Requirements in the US

The collection and recycling requirements in the US are another way for producers to take responsibility for their waste. In Maine, producers must contribute to a fund based on how recyclable their product’s packaging is. Municipalities will receive these funds as reimbursements for waste management costs and investments to improve their recycling infrastructure. Through this provision, the legislation encourages producers to collaborate with municipalities to establish waste pick-up points and recycling facilities.EPR laws also have recycling targets and rates that producers must reach. These vary from state to state and depend on the packaging materials they use. For example, the Minnesota Pollution Control Agency (MPCA) established the to hold businesses accountable for statewide environmental objectives, including a 1% waste reduction rate and a 36.9% recycling goal by 2025.

Back to Top

EPR Legislation in the European Union (EU)

EPR recycling is much more established in the region since it’s where the concept originated from. It fits well alongside the EU’s . The legal framework of the EU’s EPR laws contains four waste directives:
  1. : Packaging and Packaging Waste
  2. : End-of-life vehicles
  3. : Waste Electrical and Electronic Equipment (WEEE)
  4. : Batteries and accumulators
The multiple directives have a more comprehensive packaging coverage that enables the region to minimize the environmental impact of product packaging significantly. 

Types of Packaging in the EU Under EPR Legislation

The EU considers more types of biodegradable packaging under their EPR legislation, including the following:

  1. Plastics
  2. Paper and cardboard
  3. Glass
  4. Metals
  5. Wood
  6. Textiles
  7. Composite packaging

Responsibility of Producers in the EU

estimates that EU producers’ annual fees to EPR schemes are at €3.1 billion. However, EU legislation extends beyond financing municipal recycling programs. It holds producers responsible for the environmental impact of each stage of their product’s lifecycle, from the materials they source to how it degrades after disposal. Producers must ultimately act per the to comply with EPR laws. The EPR fees EU producers must pay are based on the weight of the packaging producers sell to consumers. It incentivizes them to optimize their packaging to become more sustainable. also vary per member state based on unique criteria. Although the EU has a general structure for violation fines and penalties, it is also up to the member states’ discretion, with some reaching as much as The EU is limiting , such as cotton bud sticks, packets, and wrappers, in favor of sustainable alternatives. It encourages eco-design and recyclable materials to minimize waste generation and improve resource efficiency.Similar to US EPR laws, the EU EPR laws mandate that producers finance the collection, sorting, and recycling of their products and packaging waste. They must establish or participate in collective producer responsibility organizations (PROs) that manage recycling.

Collection and Recycling Requirements in the EU

The EU’s member states employ various collection systems to efficiently collect and recycle packaging waste. Below are a few examples of these systems:
  • Dual system approach: requires producers to pay fees depending on product weight, incentivizing them to optimize size. It also encourages consumers to recycle bottles in reverse vending machines to earn per deposited product.
  • Producer Responsibility Organizations (PROs): These are common EU organizations funded by producers for product and packaging recycling.
  • Deposit-refund systems: Also known as deposit-refund schemes, consumers pay a fee whenever they buy beverages in glass or plastic bottles. They will receive a rebate on their purchase once they deposit the bottle at the designated area.
  • Curbside collection: The EU proposes for easier recycling.
  • Bring banks and recycling centers: These are common locations for European individuals and businesses to deposit their packaging waste easily.  
  • Sorting and material recovery facilities: segregate waste, including compostable packaging, to enhance recycling efficiency and maximize waste recovery. 
The imposes aggressive targets that member states must reach to become a highly sustainable region. It has a collective goal to recycle 65% of all packaging by 2025 and 70% by 2030.

Back to Top

Key Differences of EPR Laws in the US and EU

Below is a table for a quick overview of how extended producer responsibility legislation differs between the two regions.
United StatesEuropean Union
Coverage and scope of packaging materialsPrimarily focuses on plastics, paper and cardboard, glass, and metals. It focuses on similar materials as the US but includes wood, textiles, and composite packaging.
Responsibility and obligations of producersMost producers must play a role in managing the end-of-life disposal of their products and packaging.Producers are fully responsible for the entire life cycle of their products and packaging, from design to recycling.
Collection and recycling targets and ratesStates are allowed to set their own targets based on their EPR programs.The EU has more aggressive goals, with its overall packaging recycling target being by weight.
Enforcement mechanisms and penalties for non-complianceEPR penalties vary among states due to differing legislation. The EU provides general guidelines for fines, but each country’s policymakers have discretion.

Back to Top

Comply with Local EPR Laws

To counter the growing packaging waste problem, policymakers are implementing EPR legislation, placing greater responsibility on producers to minimize environmental impact. It means considering sustainability throughout the product’s lifecycle.

The legislation ultimately pushes producers to switch to sustainable packaging. Regions approach EPR regulations differently, with tighter regulations in more EU areas than in the US. However, it doesn’t mean businesses should avoid prioritizing sustainability. 

While EPR laws may vary, their common goal is to reduce environmental impact and promote sustainability. For expert guidance on complying with EPR legislation in your region, consult the printing professionals at Meyers. 

We bring your packaging solutions to life with professional printing solutions. Contact Meyers today for EPR-compliant custom packaging solutions and prime labels.